€5 499,45 ( €4 545,00 )

Běžná cena: €5 499,45

Ušetříte: €0,00


In 42 days


  • Glass fronted
  • Full

This wood stove is a variety of the warm-air stove Falco Eco and is designed for both local heating and a long distance heat distribution; the device can be placed outside of the heated space (boiler rooms, etc.). This type of stove is completely coated and equipped with radial stove fan that forces the air to the lower part of the stove. The air cools sides of the wood stove and it is then forced through the tubular exchanger out of the stove. This enables the maximal heat transfer and a high efficiency.

The heated air is led into the flange of 450 mm diameter. It can also be distributed through the warm-air distribution system. This circle may be closed and attached with a filtration device. The stove is equipped with a thermometer and an electronic fan revolution regulation LDS, which dependent on temperature secures an ideal air flowrate while it serves as a thermostatic sensor.

- High efficiency

- Built in warmth exchanger

- Heat-resistant steel tubes used

- Bicameral burning system

- Long burning time

- Simple primary air control

- Fireclay fireplace

- Low wood consumption

- Possible to stoke logs of length 38 cm

- The stove can be placed out of the heated space (e. g. boiler room)

- Possibility of heated air distribution

- Overheating risk lowered – long lifespan

- Automatic fan revolution regulation

- Low acquisition costs for the warmth distribution system

- Warm-air cauldron leaflet

- More information about the warm-air cauldrons

Nominal performance: 80 kW
Performance: 40 až 80 kW
Heated space: 1100 až 2200 m3
Fuel consumption: 19 kg/h
Efficiency: 85.6 %
Flue diameter: 200 mm
Chimney draught: 12 Pa
Warmed air flow rate: 1600 až 1600 m3/h
Stable outlet temperature: 50 až 110 °C
Emissions by 13 % O2: 0.07 %
Ventilator power input: 250 až 250 W
Stove height: 1435 mm
Stove width: 870 mm
Stove depth: 1443 mm
Stove weight: 550 kg
Max. logs length: 1000 mm
Warm air outlet diameter: 450 mm
Cold air input diameter: 315 mm


Add a review